Canpipe Limited

Environmental Monitoring Supplies

PVC Sampling Pumps

Canpipe carries Waterra carries both 12 volt and 24 volt submersible pumps that are designed specifically for well purging and sampling procedures for groundwater monitoring programs. Numerous models are available to meet your specific needs. All pumps are PFAS, PFOAS and PFOA free.

All of these pumps can greatly speed up the process of purging and sampling monitoring wells, especially if dedicated installations are used. These pumps are complete and ready to use.

Features of the Plastic Pumps
  • can operate under harsh conditions and higher turbidity
  • runs continuously in water without the need for a cool down
  • sleek exterior minimizes well hang-ups
  • very reliable and economical
  • 400 hour motor life
  • PFAS, PFOS & PFOA free
Cyclone

WSP-12V-1 Pump (Cyclone)

This WSP-12V-1 pump (Cyclone) is capable of lifting up to 25 feet (8 m) by simply connecting it to a 12 volt battery with the included alligator clips. Its reliable design is suitable for continuous sampling and purging of groundwater wells. If you want speed control, then you will need a PA-10800 controller.

Mini-Typhoon

WSP-12V-2M Pump (Mini-Typhoon)

This WSP-12V-2M pump (Mini-Typhoon) is capable of lifting up to 40 feet (12 m) by simply connecting it to a 12 volt battery with the included alligator clips. Fits in 2 inch wells. Its reliable design is suitable for continuous sampling and purging of groundwater wells. If you want speed control, then you will need a PA-10800 controller.

Cyclone

WSP-12V-2 Submersible Pump (Typhoon)

This WSP-12V-2 Submersible Pump (Typhoon) is capable of lifting up to 50 feet (15 m)  by simply connecting it to a 12 volt battery with the included alligator clips. Its reliable design is suitable for continuous sampling and purging of groundwater wells. If you want speed control, then you will need a PA-10800 controller.

Tempest

WSP-12V-3 Submersible Pump (Tempest)

The WSP-12V-3 Submersible Pump (Tempest) is capable of lifting up to 60 feet (18 m) by simply connecting it to a 12 volt battery with the included alligator clips. Fits in 2 in (5 cm) wells. Its reliable design is suitable for continuous sampling and purging of groundwater wells. If you want speed control, then you will need a PA-10800 controller.

Mini-Monsoon

WSP-12V-4 Submersible Pump (Mini-Monsoon)

This WSP-12V-4 Submersible Pump (Mini-Monsoon) is capable of lifting up to 70 feet (21 m) from below ground level by simply connecting it to a 12 volt battery with the included alligator clips. Fits in 2 in (5 cm) well. Its reliable design is suitable for continuous sampling and purging of groundwater wells. If you want speed control, then you will need a PA-10800 controller.

Tempest

WSP-12V-3B Submersible Pump (Super Twister)

This WSP-12V-3B (Super Twister) Submersible Pump is capable of lifting up to 85 feet (26 m) from below ground level by simply connecting it to a 12 volt battery with the included alligator clips. It fits 2 in (5 cm) wells. Its reliable design is suitable for continuous sampling and purging of groundwater wells. If you want speed control, then you will need a PA-10800 controller.

Tempest

WSP-12V-5 Submersible Pump (Tornado)

This WSP-12V-5 (Tornado) Submersible Pump is capable of lifting up to 100 feet (31 m)  by simply connecting it to a 12 volt battery with the included alligator clips. It fits in 2 in (5 cm) wells. Its reliable design is suitable for continuous sampling and purging of groundwater wells. If you want speed control, you will need a PA-10800 controller.

WSP-24V-3 Submersible Pump (Tsunami)

This WSP-24V-3 (Tsunami) Submersible Pump is capable of lifting up to 100 feet (30 m) by simply connecting it to the PA-10700 (Power Booster 2 Controller) or PA-10750 (Low Flow with Power Booster 2 Controller), then connecting the controller’s positive and negative alligator clamps to the 12 volt battery. Fits 2 in (5 cm) wells. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

WSP-24V-4 Submersible Pump (Monsoon)

This WSP-24V-4 (Monsoon) Submersible Pump is capable of lifting up to 120 feet (37 m) by simply connecting it to the PA-10700 (Power Booster 2 Controller) or PA-10750 (Low Flow Power Booster 2 Controller), then connecting the controller’s positive and negative alligator clamps to the 12 volt battery. Fits 2 in (5 cm) wells. Its reliable design is suitable for continuous sampling and purging of groundwater monitoring wells.

WSP-24V-5 Submersible Pump (Hurricane)

This WSP-24V-5 (Hurricane) Submersible Pump is capable of lifting up to 150 feet (46 m) by simply connecting it to the PA-10700 (Power Booster 2 Controller) or PA-10750 (Low Flow Power Booster 2 Controller), then connecting the controller’s positive and negative alligator clamps to the 12 volt battery. Fits 2 in (5 cm) monitoring wells. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

WSP-24V-6 Submersible Pump (Mega-Monsoon)

This WSP-24V-6 (Mega-Monsoon) Submersible Pump is capable of lifting up to 200 feet (61 m)  by simply connecting it to the PA-10850 (Low Flow Power Booster 3 Controller), then connecting the controller’s positive and negative alligator clamps to the 12 volt battery. Fits 2 in (5 cm) monitoring wells. Its reliable design is suitable for continuous sampling and purging of groundwater wells.

ND Supernova

WSP-12V-ND70 Submersible Pump (ND Supernova)

The  WSP-12V-ND70 (ND Supernova) Submersible Pump is capable of lifting from depths of up to 70 feet (21 m) to ground level by simply connecting it to a 12 volt battery with the included alligator clips. Its reliable design is suitable for continuous sampling and purging of groundwater wells. The Supernova pumps are only to be used in 1.5 in (3.7 cm) wells. The use of this product in any well larger than a 1.5 in (3.7 cm) well will void all warranties expressed or implied.

WSP-12V-ND120 Submersible Pump (ND Supernova 120)

The  WSP-12V-ND120 (ND Supernova 120) Submersible Pump is capable of pumping from depths of up to 120 feet (37 m) to ground level with the use of two controller options. Its reliable design is suitable for continuous sampling and purging of groundwater wells. The Supernova pumps are only to be used in 1.5 in (3.7 cm) wells. The use of this product in any well larger than a 1.5 in (3.7 cm) well will void all warranties expressed or implied.

Stainless Steel Sampling Pumps

Features of the Stainless Steel Pumps
  • simple to operate — powered by 12 volt DC batteries
  • can operate under harsh conditions with higher turbidity
  • have been installed in hundreds of remediation sites using pump and treat systems
  • can also be used with solar panels for long term groundwater remediation
  • great substitute for Engineered Plastic Pumps
  • computer engineered bottom debris filter screen allows operation under harsh conditions with higher turbidity
  • long lasting, high performance pump motor lasts over 400 hours under normal working conditions.
  • simple to clean and decontaminate
  • The main parts that wear out, consisting of the motor and seal, all have been incorporated into a single replaceable motor module
  • Should the existing replaceable motor module fail in the field, a new replaceable motor module can quickly be installed within 60 seconds by a simple quarter turn twist. Once installed, your pump is essentially new and will have a life span identical to a new pump
(SS Mini-Monsoon 60)

WSP-SS-60XL Stainless Steel Submersible Pumps
(SS Mini-Monsoon 60)

The WSP-SS-60XL (SS Mini-Monsoon 60) Stainless Steel Submersible Pumps can lift up to 60 feet (18 m). These pumps suitable for dedicated or non-dedicated groundwater monitoring applications in 2 inch (5 cm) wells where a simple sampling pump is desired. These pumps offer a simple solution when the project requires equipment which can be decontaminated. Their simple design offers reliable, long lasting service for groundwater monitoring or long term remediation, even is harsh conditions, with the convenience of the replaceable motor module.

The XL SERIES pumps are only 1.82 in (4.6 cm) OD and constructed of three high polished stainless steel parts: 1. The replaceable motor module 2. The motor housing top connector 3. The outside pump housing

(SS Mini-Monsoon 60)

WSP-SS-80XL Stainless Steel Submersible Pumps
(SS Mini-Monsoon 80)

The WSP-SS-80XL (SS Mini-Monsoon 80) Stainless steel submersible pump can lift up to 80 feet (24 m). Theses pumps are suitable for dedicated or non-dedicated groundwater monitoring applications in 2 inch (5 cm) wells where a simple sampling pump is desired. These pumps offer a simple solution when the project requires equipment which can be decontaminated. Their simple design offers reliable, long lasting service for groundwater monitoring or long term remediation, even is harsh conditions, with the convenience of the replaceable motor module.

The XL SERIES pumps are only 1.82 in (4.6 cm) OD and constructed of three high polished stainless steel parts: 1. The replaceable motor module 2. The motor housing top connector 3. The outside pump housing

(SS Mini-Monsoon 60)

WSP-SS-100XL Stainless Steel Submersible Pumps
(SS Mini-Monsoon 100)

The WSP-SS-100XL (SS Mini-Monsoon 100) Stainless steel submersible pumps offers lifts of up to 100 feet (30 m). These pumps are suitable for dedicated or non-dedicated groundwater monitoring applications in 2 in (5 cm) wells where a simple sampling pump is desired. These pumps offer a simple solution when the project requires equipment which can be decontaminated. Their simple design offers reliable, long lasting service for groundwater monitoring or long term remediation, even is harsh conditions, with the convenience of the replaceable motor module.

The XL SERIES pumps are only 1.82 in (4.6 cm) OD and constructed of three high polished stainless steel parts: 1. The replaceable motor module 2. The motor housing top connector 3. The outside pump housing

ss monsoon

WSP-SS-120XL Stainless Steel Submersible Pumps
(SS Monsoon)

The WSP-SS-120 (SS Monsoon) Stainless Steel Submersible Pump is capable of lifting up to 120 feet (37 m) by simply connecting it to the PA-10670 (Low Flow Power Booster 2 “LCD” Controller) then to a 12 volt battery, thereby energizing the pump. Its reliable design is suitable for continuous purging of groundwater wells.

The SS Monsoon is only 1.82 in (4.6 cm) OD and constructed of three high polished stainless steel parts: 1. The replaceable motor module 2. The motor housing top connector 3. The outside pump housing

ss huricane

WSP-SS-150 Stainless Steel Submersible Pump
(SS Hurricane)

The WSP-SS-150 (SS Hurricane) Stainless Steel Submersible Pump is capable of lifting up to 150 feet (46 m) by simply connecting it to the PA-10675 (Low Flow Power Booster 2.5 “LCD” Controller), then to a 12 volt battery, thereby energizing the pump. Its reliable design is suitable for continuous purging of groundwater wells.

The WSP-SS-150 is only 1.82 in ( 4.6 cm) OD and constructed of three high polished stainless steel parts: 1. The replaceable motor module 2. The motor housing top connector 3. The outside pump housing

ss mega monsoon

WSP-SS-180 Stainless Steel Submersible Pump
(SS Mega-Monsoon)

The WSP-SS-180 (SS Mega-Monsoon) Stainless Steel Submersible Pump is capable of lifting up to 180 feet (55 m)  by simply connecting it to the PA-10680 (Low Flow with Power Booster 3 “LCD” Controller), then to a 12 volt battery, thereby energizing the pump. Its reliable design is suitable for continuous purging of groundwater wells.

The WSP-SS-180 is only 1.82 in (4.6 cm) OD and constructed of three high polished stainless steel parts: 1. The replaceable motor module 2. The motor housing top connector 3. The outside pump housing