Request A Quote

Phone: 416-244-6476
Email: info@canpipe.com

    AQUA-CLEAR® MGA

    AQUA-CLEAR® MGA

    AQUA-CLEAR® MGA dry blend of granular acid and additives is used in the removal of iron, manganese and carbonate scale. It retains strength longer than most liquid acids, which increases its cleaning capability.

    Available in 5 gallon container.

    Application

    Disperse scale and incrustation. Remove scale and incrustation from the water well screen, casing, gravel pack and pumping equipment. Restore well production.

    Advantages

    NSF/ANSI Standard 60 certified. Safe to use on all plastics, rubber and metals. No harmful vapors. Improves water quality (color, taste and appearance). Reduces equipment and piping failures due to scale build-up and corrosion.

    Recommended Treatment

    • Record initial well water pH.
    • The preferred application method is to apply a solution of AQUA-CLEAR MGA additive into the screened interval through a tremie pipe.
    • Mix AQUA-CLEAR® MGA with water at ½ – 1 lb/gal of water or 0.06 – 0.12 kg/L of water and apply directly into screened interval with a tremie pipe. When utilizing this method, calculate the volume of water in the screened area and double the calculated volume to account for the water in the gravel pack and formation interface.

    CAUTION: Never mix chlorine and AQUA-CLEAR® AE liquid blend in well.

    The above are generalized concentrations of AQUA-CLEAR® MGA dry granular acid to be added to water-based drilling fluids. The ultimate usage concentration will be based on local geology, application and mixing efficiency. In the event that further information is needed, please refer to the Product Data Sheet or contact your local Baroid IDP representative.


    Have a question? Give us a call.

    Our lines are open and operated by in-house customer support from Monday to Friday at all locations.

    Call Us