Request A Quote

Phone: 416-244-6476

    CON DET®

    Con Det

    CON DET®

    CON DET® wetting agent is a proprietary blend of anionic surfactants is specially formulated for use in fresh water, salt water and in low-solids drilling fluids.

    Available in 5 gallon container.


    Keep the drill bit clean. Slow breakup of cuttings while being transported from bit to surface. Counteract the sticking tendencies of clays, thereby reducing wall packing, bit balling, booting-off and formation of mud rings. This product is a skin friction reducer. It helps to minimize bit balling and mud rings on the drill string. It also assists in minimizing drag on product pipe during installation.


    Effective in low concentrations. Easy to mix with water.

    Recommended Treatment

    % by Volume Quarts/100 gals Liter/ m³
    0.125 – 1.0 0.5 – 4.0 1.25 – 10.0

    It is recommended that Soda Ash (sodium carbonate) be added to the make-up water prior to the addition of BORE-GEL® for reduction of excess calcium and pH adjustment. This product CANNOT be mixed with a drilling gel (BORE-GEL® or QUIK-GEL® as it is strictly for clay inhibition.

    The above are generalized concentrations of EZ-MUD® PLUS liquid polymer emulsion to be added to water-based drilling fluids. The ultimate usage concentration will be based on local geology, application and mixing efficiency. In the event that further information is needed, please refer to the Product Data Sheet or contact your local Baroid IDP representative.

    Have a question? Give us a call.

    Our lines are open and operated by in-house customer support from Monday to Friday at all locations.

    Call Us